Phone No

+1 444 55566

Email ADDREss

info@automotiveaddons

Pioneer TS-SWX2002 8 Inch Subwoofer

Pioneer TS-SWX2002

5/5
Are you looking for the top-rated 8-inch subwoofer with low-frequency bass? Then this product is made for you. With better and more advanced technology CT sounds has introduced its next MESO series product. Also, it is the perfect choice for the price. The CT Sounds Meso 8” are one of the best 8 inch car subwoofers as they handle enormous power at the maximum volume level. It has an RMS power of 800W and a max power of 1600W. It is also called the most powerful 8-inch subwoofer and the leader of all subwoofers. It has an advanced cooling system, so you don’t need to worry about anything during long driving. It can be mounted in the depth of 6.6 inches. The CT Sounds Meso 8” has a nominal impedance of 2 ohms and a voice coil of 2.5-inch diameter. It has a Y35 graded ferrite magnet, which is considered the boss of the magnet world, the magnet is safely kept in a strong casing to avoid any damage. Additionally, it is capable of handling high-powered audio frequencies. The CT Sound Meso 8” has a poly-cotton blend spider with copper tinsel lead. When it comes to reliability, performance, top sound quality, and affordability the CT Sounds Meso 8” is a must-have car subwoofer. Buy it to enjoy the smooth and crisp sound of the MESO series.

Pioneer TS-SWX2002

5/5
Doesn’t work well for frequencies less than 40Hz.

Pioneer TS-SWX2002

5/5

BEST 4×10 speakers

Factory automobile speakers aren’t exactly known for their sound quality. They frequently lack clarity and distort when played loudly. Replacing factory speakers with high-quality aftermarket speakers is the best way to improve your car’s sound quality. 

But what size speakers should you put in? Consider installing the most excellent 4×10 speakers if you’re designing a custom automotive sound system. These speakers have a long, narrow form that allows them to fit into tight locations where more prominent speakers, like 6.5 automobile speakers, cannot. As a result, they’re ideal for installing vehicles with minimal space.

While the best 4×10 speakers are a good option, they are not all equal. Some brands may not provide the level of performance that you desire. When looking for the best 4×10 speakers, keep a few things in mind to make the best decision possible. If the multiple options available are overwhelming you, continue reading this guide for reviews of the most acceptable options and advice on making the best decision.

4×10 speaker adapter

4×10 vs 6×9 speakers

Kenwood KFC-415C 160-Watt 4-Inch x 10-Inch Two-Way Speaker System

Looking for a powerful pair of the best 4-Inch x 10-Inch car speakers? Look no further than the Kenwood KFC-415C. These 160-watt 4×10″ two-way speakers will give your ride the sound it deserves.

The poly woofers deliver booming bass, while the balanced dome polyamide provides clear highs. So crank up the tunes and enjoy the ride.

160-watt 4×10" two-way speakers

poly woofers

balanced dome polyamide

Provides clear highs

91 dB sensitivity

Include tweeter

Tweeter crossover

Polypropylene cone

Don’t give very high sound quality

The build quality is not nice

160-watt 4×10" two-way speakers

poly woofers

balanced dome polyamide

Provides clear highs

91 dB sensitivity

Include tweeter

Tweeter crossover

Polypropylene cone

Don’t give very high sound quality

The build quality is not nice

Pyle store 3-Way Universal Car Stereo Speakers

Pyle offers a pair of car speakers with a power of 150 watt RMS to 300-watt peak with 4 ohms impedance to produce high-quality sound resonance. Play your favorite tunes as loud as you want and with style!

These are the best 4×10 car speakers made from highly durable substances and feature a three-way triaxial speaker system. The ¾” piezo tweeters, 1″ neodymium film dome midrange speakers are found in each set.

This coaxial speaker has been designed to resist corrosion, and it uses non-fatiguing rubber suspension for all its components to prevent accidents.

The ideal solution for your in-car audio needs, this mount fits most radios and premium sound systems. Its shallow depth and 2.52″ mounting height make it easy to install. The included cables and mounting hardware will help you get it up and running quickly.

1" neodymium film dome

¾" piezo tweeters

2.52" mounting heigh

High-quality sound resonance

Non-fatiguing rubber suspension

You can't play it very loud

Not easy to install

1" neodymium film dome

¾" piezo tweeters

2.52" mounting heigh

High-quality sound resonance

Non-fatiguing rubber suspension

You can't play it very loud

Not easy to install

KICKER 47KSC41004 KS Series 2

With these 2 of the best 4×10-inch coaxial speakers, you may listen to music at concert-like volume while preserving a smooth, nuanced sound.For optimal results, use 15 to 75 watts of recommended power (RMS) power.

2-WAY SPEAKER 4-ohm voice coil, high-power handling, 0.5-inch tweeter, neodymium tweeter magnet, and long-lasting design. It is one of the best 4×10-inch speakers with smooth precision midrange and the midbass tones delivered by internally dampened polypropylene cones and durable rubber sounds. At the same time, natural, detailed highs are produced by a high-quality silk tweeter.

Low profile design and shallow mounting depth allow easy installation under factory grilles (grille available separately). 3.88 x 9.38-inch mounting hole diameter (L x W); 2.38 inch top mount depth; 2.8.1 inch bottom mount depth.

15 to 75 watts RMS power

3.88 x 9.38-inch mounting hole diameter

2.8.1 inch bottom mount depth

Neodymium magnet

2.38 inch top mount depth

Only be used as a mild speaker

Not a very high powered speaker

15 to 75 watts RMS power

3.88 x 9.38-inch mounting hole diameter

2.8.1 inch bottom mount depth

2.38 inch top mount depth

Only be used as a mild speaker

Not a very high powered speaker

Pyle 4" x 6" Three Way Sound Speaker System

The striking blue poly injection cone provides enough rigidity without adding weight to the woofer. The ASV voice coil is designed for high-temperature, high-wattage environments.

Pyle’s 4-ohm component audio speaker adjusts for minor wiring in today’s cars. It also maximizes every 240 watt your car stereo has to provide.

The Pyle Pro three-way, is the best 4×10 speakers system and has a one-inch neodymium film dome midrange and a 3/4-inch piezo tweeter. It contributes to each pair’s smooth, powerful, and detailed sound.

The 20-ounce magnet structure, 1″ neodymium film dome midrange, and 34″ piezo tweeter power these speakers, which have a frequency response of 95Hz to 20Khz. It also has a standard 4″ X 6″ dimension that suits OEM placements.

The non-fatiguing butyl rubber surround holds your speakers in place while extending the product’s lifespan. The richest sound comes from a 1″ high-temperature ASV voice coil, ensuring minimum distortion and an open sound stage.

standard 4" X 6" dimension

Defined Structure

Low impedance

Loose tweeter assembly

Not good quality

standard 4" X 6" dimension

Defined Structure

Low impedance

Loose tweeter assembly

Not good quality

CERWIN-Vega 2-Way Coaxial Speakers

The CERWIN-Vega 2-Way Coaxial Speakers are one of the best 4×10 speakers with maximum power of 300W max. They have the amazing Stamped-steel vented-airflow Basket frames to control the air flow.

This speaker comes with the Graphite-injected reinforced spun, Cone and the Linear-woven Treated red spiders.So, why not try these speakers right now?

300W max

Graphite-injected reinforced spun cone

Linear-woven Treated red spiders

Busting issues are seen

Not good sound quality

300W max

Graphite-injected reinforced spun cone

Linear-woven Treated red spiders

Busting issues are seen

Not good sound quality

Pyle PL410BK

Pyle offers a pair of automobile speakers with a power range of 150 Watt RMS to 300 Watt peak and a 4-ohm impedance to produce high-quality sound resonance. Play your favorite songs as loudly as you like stylishly.

These best 4 x 10 INCH SPEAKERS, is a clean-cut automobile speaker with a black high-quality poly injection speaker cone measuring 9.92″ x 4.33″ x 2.87″. Enhances the sound quality of your car system by delivering powerful audio sound. A 25oz high-density rubber magnet boot is also included.

These automobile quality 4×10 speakers have a large butyl rubber surround for added durability. Each speaker is the three-way triaxial speaker system featuring 34″ piezo tweeters and a 1″ neodymium film dome midrange.

To withstand corrosion, the voice coil in this coaxial speaker is a dual 1″ or 25mm high-temperature ASV. To keep equipment safe, it’s designed with a non-fatiguing rubber suspension. These speakers can be mounted on the vehicle’s door or side panel.

150 Watt RMS

25oz high-density rubber magnet boot

high-temperature ASV

1" neodymium film dome midrange.

Not easy to install

Not a complete 3 way

150 Watt RMS

25oz high-density rubber magnet boot

high-temperature ASV

1" neodymium film dome midrange.

Not easy to install

Not a complete 3 way

The amazing 4×10 2-way speakers pair have IMPP (Injection Molded Polypropylene) woofer paper cone tweeter sensitivity of 91 dB and with the frequency response of 38-23,000 Hz. In addition the Pioneer TS-A4103 4 x 10 2-way Car Speakers has 2-35 watts RMS is the suggested power range.

It is one of the best 4 x 10 INCH SPEAKERS with Composite Cone Woofer and 1-5/8 Cone Tweeter.

Injection Molded Polypropylene woofer cone

sensitivity of 91 dB

frequency response of 38Hz to 23,000 Hz

Composite Cone Woofer

Does Not interface well with the GM wiring

Not enough power

Injection Molded Polypropylene woofer cone

sensitivity of 91 dB

frequency response of 38Hz to 23,000 Hz

Composite Cone Woofer

Does Not interface well with the GM wiring

Not enough power

Planet Audio TRQ413 4×10 Car Speakers

The TRQ413 Torque by Planet Audio is a 3-way 400-watt Full Range Speakers best 4″ x 10” speaker.

The Entire Spectrum has 400 Watts MAX and 200 Watts RMS with 3-way Speaker Pair 4″ x 10″ Power Handling per Pair. In addition it has a Frequency Response of 70 Hz to 20 kHz and a Sensitivity of 86dB

The Planet Audio TRQ 413 4×10 Car Speakers comes with 2 Tweeters Per Speaker and with 3 Year Platinum Dealer Warranty Black Poly Injection Woofer Cone and Rubber Surround.

3-way 400-watt

200 Watts RMS

Frequency Response of 70 Hz to 20 kHz

Sensitivity of 86dB

Blown out issues are reported

Don’t provide a high quality sound

3-way 400-watt

200 Watts RMS

Frequency Response of 70 Hz to 20 kHz

Sensitivity of 86dB

Extremely loud (EXL) sound.

Blown out issues are reported

Don’t provide a high quality sound

Pyle 3-Way 4" x 10" Triaxial Loud Universal Car Stereo Speakers

Pyle offers a pair of automobile speakers with a power range of 150 Watt RMS to 300 Watt peak and a 4-ohm impedance to produce high-quality sound resonance. So play your favorite songs as loudly as you like stylishly.

A clean-cut automobile speaker with a black high-quality poly injection speaker cone. Enhances the sound quality of your car system by delivering powerful audio sound. A 20 oz high-density rubber magnet boot is also included.

These automobile best 4″ x 10” speakers have a large butyl rubber surround for added durability. Each speaker in the three-way triaxial speaker system features piezo tweeters and a 1″ neodymium film dome midrange.

To withstand corrosion, the voice coil in this Hi quality 4″ x 10” coaxial speaker is a dual 1″ or 25mm high-temperature ASV. To keep equipment safe, it’s designed with a non-fatiguing rubber suspension. These speakers can be mounted on the vehicle’s door or side panel.

The 2. 13″ mounting depth makes it simple to install and fits most audio systems for automobiles, boats, motorcycles, and RVs. The essential connections, speaker grills, and mounting hardware are included for a quick and painless installation.

1" neodymium film dome midrange

2. 13" mounting depth

Non-fatiguing rubber suspension

20 oz high-density rubber magnet

300 Watt peak power

Not an easy install

The RMS is less as stated

1" neodymium film dome midrange

2. 13" mounting depth

Non-fatiguing rubber suspension

20 oz high-density rubber magnet

300 Watt peak power

Not an easy install

The RMS is less as stated

Memphis Audio PRX410 Power Reference Car Speaker

Improve the performance of your audio system with this high-performance multi-directional speaker. Speakers with a diameter of 4 inches and a diameter of 10 inches

At 100 watts peak and 50 watts RMS, this unit delivers dependable service.

A PEI dome tweeter is included to provide a broader dispersion pattern.

A polyurethane surround protects the speakers. The ideal choice for most automobiles who are looking for the  best 4″ x 10” speakers and  needing an audio upgrade.

Multi-directional

100 watts peak

Strong performance

PEI DOME TWEETER

polyurethane surround

Expensive speaker

Not easy to install

Multi-directional

100 watts peak

Strong performance

PEI DOME TWEETER

polyurethane surround

Expensive speaker

Not easy to install

 

How to Choose the Best 4×10 Speakers

When you’ve decided it’s time to upgrade your car speakers and pick on the best 4×10 inch speakers, you must keep a few things in mind while purchasing. Here are the essential factors to consider better to select the best 4 “x10” car speakers.

1.Power handling

One of the very vital elements to consider is a speaker’s power handling. RMS and peak power ratings are used to describe power handling. The RMS power rating is essential since it indicates how much continuous power the speaker can safely sustain. On the other hand, peak power is the maximum power a speaker can withstand in brief bursts.

The RMS power rating, in short, establishes how powerful a speaker is. Make sure the speaker you chose has enough power to match the amplifier or care receiver’s output. In addition, make sure the speakers aren’t overpowered or underpowered.

2.Speaker type

Most 4×10 replacement speakers are available in 2-way or 3-way configurations. Two drivers, a tweeter and a woofer make up a 2-way speaker. On the other hand, three-way speakers have three drivers: a woofer, a tweeter, and a mid-range driver.

While both types of speakers create full-range sound, 3-way speakers can span a more excellent frequency range and provide more precise sound.

3.Construction materials

Make that the speaker is built of long-lasting materials. The surround and Cone, for example, should be constructed of light but stiff materials. The materials used should be able to withstand extreme weather. In addition, the voice coil should be built of a temperature-resistant material. Finally, the speaker basket should be vented to allow for free air circulation.

4.Sensitivity

The amount of sound that any speaker reproduces from the power it gets from an amplifier or receiver is referred to as the sensitivity rating. If your receiver or amplifier only outputs a tiny amount of energy, be sure the speakers you purchase have a high sensitivity to create enough sound. Conversely, consider speakers with a low sensitivity rating if your receiver or amplifier has increased power output for the most pleasing sound reproduction.

Frequently Asked Questions – FAQ's

A. If you’re a basshead, 4×10 speakers might not be able to offer the punchy bass you’re looking for in your music. Although most high-end models are not built to handle low frequencies, they can nevertheless provide enough bass for you to enjoy your music.

Most 4-inch speakers best serve the mids and highs. As a result, it’s critical to make sure the speaker you purchase has the appropriate drivers. In addition, the tweeter’s quality is essential because it impacts the clarity and overall sound quality.

Finally, if you’re on a budget, a 2-way speaker is preferable. However, a 3-way speaker is ideal if you enjoy music and appreciate the high-quality sound. The professionals at Automotive accessories can help you decide whether you want a 2-way or 3-way speaker system.

YESS!! Because it features an additional driver, a dedicated subwoofer that solely handles low frequencies, 3-way speakers provide more options and overall higher sound quality. Three-way speaker models are available from some of the most incredible speaker brands. Voice clarity has improved. You won’t get distortion if the crossover is good.

Two speakers are combined into a single unit in stereo speakers. They are typically placed on the device’s left and right sides, and each speaker uses the device’s stereo sound channel to create a stereo effect.

A subwoofer is an additional driver in a three-way speaker that covers the low frequency or bass region. The best thing about this configuration is that you can alter these speakers to play different forms of music, and they will sound fantastic in any style–no matter what song is playing.

The term “full-range” refers to a speaker who can reproduce the whole human speech spectrum. The low frequency of most full-range speakers is roughly 60-70 Hz.

A two-way speaker with a subwoofer and a tweeter could be combined with a three-way midrange, tweeter, and super tweeter combo. But that’s pretty much where the story ends. Component speakers, on the other hand, can be customized indefinitely.

Conclusion

Replacing your car’s old factory speakers with the quality 4×10 aftermarket speakers is an excellent method to improve the sound quality. This can only be accomplished by selecting the best 4×10 speakers. Make sure the speakers you purchase are capable of meeting your sound requirements. Also, keep these reviews and guidelines in mind when shopping for replacement speakers to increase your chances of receiving the most value for your money.